4-Post HD-9XL

In stock for immediate delivery
Free shipping to direct area's
Free shipping to the Canada-USA border
Fully stocked on parts
Technical Support 7 Days a week

The HD-9XL is your vehicle storage and service solution and the ultimate tool for the DIY’er.
Available with casters, drip-trays, jack platform and more.

The HD-9XL four-post lift features wide drive-thru clearance and a standard lift-height but with extended runways for accommodating longer wheelbase vehicles. About the size of a typical parking space, these lifts truly maximize valuable floor space. Use them for storing cars and trucks, ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be up off the ground and safely in the air. If you've got at least a standard 8-foot ceiling, you'll be able to make use of that wasted vertical space above your car. And optional caster kit allows you to roll the lift outside or wherever best suits your need.

Dependable design
4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

Dual-hub cable sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

Multi-level locking positions
The HD‐9XL is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

Heavy-duty aircraft cable
Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is 640% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Large base plates
12" x 12" base plates provide a solid foundation for the HD‐9XL.

Single hydraulic cylinder

Leak proof cylinder technology only available for BendPak four-post lifts

Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

Durable powder-coat finish
All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

Caster kit
Optional 4-piece caster kit makes your lift portable, with or without car.

Four models to choose from
Take your pick. You're currently looking at the extra-wide, standard-height HD‐9XL. The HD-9ST is the narrow model, the HD-9 is the standard-width model and the HD-9STX is the narrow-width, tall model car lift.

Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

Longer approach ramps
These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

Automatic safety locks
Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

Service is our Specialty

You Never Have To Say, "Now What?" Again
BendPak has over 650 installation and service centers located in the United States. These fully equipped installation and service centers have specialty service fleets that make a living installing and servicing large car dealerships, national accounts, auto repair centers and occasional auto enthusiasts and DIY'ers.

BendPak customers are supported by a specialized service program known as Certified Service SM. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs including highly responsive technical support; one‐on‐one communication with account representatives and technical experts; electronic data interchange (EDI); a highly‐efficient logistics support chain, automated dispatch and communications system and a tightly integrated system that allows incident management; trouble‐shooting and reporting to be seamlessly provided to customers seamlessly, regardless of location.

BendPak Inc. serves more than half a million satisfied customers worldwide. Our award-winning Certified Service™ program is how we keep those customers smiling long after the initial purchase of their garage equipment product. When the unexpected happens, BendPak Certified Service™ is your first and final step towards making it right.

One phone call puts you in touch with our fully staffed Customer Care Center (CCC) to meet all your needs with highly responsive technical support, one-on-one communication with account representatives and technical experts, an Electronic Data Interchange (EDI); a highly-efficient logistics support chain, as well as automated communications and dispatch network. All of these support features are tightly integrated into a well-oiled system, so we can seamlessly provide the best incident management, trouble-shooting and reporting to all our customers right over the phone.

Whether you're in the United States or almost anywhere around the globe, an entire fleet of fully-equipped service vehicles is standing by to dispatch a mobile factory-trained technician or service provider unit to your location, if needed. Our on-site experts are trained and qualified to perform warranty services, equipment repairs, inspections, preventative maintenance and part replacement with unparalleled speed and efficiency, right there on your premises.

In the event that you need a replacement part, BendPak's "Spare in the Air" repair strategy provides overnight-or-sooner part replacement. Our comprehensive spares inventory and partnerships with industry-leading service providers ensure the quickest possible turnaround. What's more, BendPak's warehouses and shipping processes are state-of-the-art. A logistics support team verifies availability, inventory, shipping and delivery from start to finish. So when you buy BendPak, you're getting more than great automobile service equipment. You're getting peace of mind.

The BendPak / Ranger technical support staff is located in the same facilities as our engineers, manual writers and assemblers, giving you unprecedented access to the men and women who designed the very equipment you're calling about. Our tools, equipment and necessary technical resources are 100% available to you, so any complex technical issue is resolved without delay. You aren't going to find this kind of convenient, dedicated support anywhere else besides BendPak / Ranger.

Our reputation is one of not only legendary products, but legendary technical support. We're obsessed with making sure that you are a BendPak / Ranger fan for life, so we give you the very best after-sales support in the world. It's both our pleasure and our specialty. The moment you purchased a product from BendPak / Ranger, you became part of a family of folks who have a passion for automobiles and service equipment, just like you. We're just happy to take care of our own and committed to making it as easy as possible to solve your equipment issues. With BendPak's award-winning Certified Service™ program, it's step 1 and you're done!

Call Us Toll Free:

800-253-2363

Click picture for more information

Quick Specs