In stock for immediate delivery
Free shipping to direct area's

Free shipping  to the Canada-USA border

Fully stocked on parts
Technical Support 7 Days a week
sales@MyToolGuy.com
203-813-0414
THE TOOL CONNECTION since 1984


FREE SHIPPING!  
(contiguous 48 states)

This item ships directly from the factory.
 


Bend Pak
PL 14000
Platform Assembly
Price:
 $ 15150
Yours $13,170
financing-available-2.png
Free Shipping Continental US
Direct shipping points only.
 Surcharge may apply to rural &
interline points.

 
ORDERING & PAYMENT

             
 
PL-14000
Closeout Leg Set

Price:  $3900
Yours $3390

PL-14000  Power Unit Single
Price:  
$1660
Yours $1440

PL-14000  Power Unit Multi operates up to 10 Lifts
Price:  
$6470
Yours $5625

Quick Specs

Lifting capacity:

14,000 lbs.

Overall length:

193"

Platform length:

155"

Overall width:

114"

Platform width:

95"

Overall height:

280"

 

  
 


 
Description
The PL-14000 by BendPak is a 4-post parking lift designed for indoor or outdoor operation and is the most cost effective way to triple the capacity of typical parking areas. The 3-stacker PL-14000 is the ultimate space saver allowing three vehicles to be stacked in a single parking space. Shared, ganged columns increase value by reducing the number of components required for multi-unit installations. Each lift uses a specially designed base frame that distributes the load making these unique lifting systems suitable for installation on virtually any residential or commercial concrete floor.

 

The PL-14000 can accommodate both cars and SUVs and may be configured as a stand-alone lift or combined into rows of multiple units. When installed in rows of multiple units, the lifts share columns dramatically increasing space efficiency. The rugged built design utilizes a dependable hydraulic and cable-based lifting system for ultimate efficiency and safe operation.

Each stacking system incorporates many distinctive features such as a full-width platform to keep bottom vehicles protected, single hydraulic lifting cylinder combined with heavy-duty steel lifting cable, automatic safety locks and reliable, ergonomic hydraulic power unit.

These state-of-the-art lifting systems are well suited for commercial parking environments and are powered by independent electric-hydraulic pump units or a multi-unit power station pump system that can operate up to 10 lifts depending on the configuration, layout, and other technical factors. They can be configured for 208-230-volt, 380-volt or 440-volt operation with International voltages also available. Multi-unit pump systems require their own dedicated 3-phase power circuit.

At BendPak, we believe in creating solutions that simplify your life. Our history of manufacturing excellence began more than 45 years ago and we continue to design and manufacture innovative car parking solutions with features and operating characteristics that meet customer requirements for quality, reliability, safety, and value. 

 

 

 

 

Features & Specifications

Click here for more pictures and specs

 

 

  • 7,000 lb. capacity per deck / 14,000 lb. capacity total
  • Perfect for cars, light trucks, motorcycles and ATV’s
  • Rugged I-beam and C-channel construction
  • Built-in wheel stops
  • Wide base-plate for maximum stability
  • Front and rear wheel chocks
  • Two-position fail safe locking system
  • Superstructure features durable powder-coat finish
  • Platforms hot dip galvanized per ASTM standards
  • Single hydraulic cylinder with heavy-duty steel lifting cable
  • Heavy-duty steel construction
  • Reliable electric-hydraulic power system
  • Full-width platform to keep bottom vehicles protected
  • Simple controls
    How to choose the right car lift for you

    BendPak's guide to finding your perfect automotive lift

  • Lifting capacity: 14,000 lbs. / 6,350 kg
  • Overall length: 193" / 4,911 mm
  • Platform length: 155" / 3,928 mm
  • Overall width: 114" / 2,896 mm
  • Platform width: 95" / 2,403 mm
  • Overall height: 131" / 7,121 mm
  • Voltages: 208-230-volt, 380-volt or 440-volt
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Service is our Specialty

You Never Have To Say, "Now What?" Again
BendPak has over 650 installation and service centers located in the United States. These fully equipped installation and service centers have specialty service fleets that make a living installing and servicing large car dealerships, national accounts, auto repair centers and occasional auto enthusiasts and DIY'ers.


BendPak customers are supported by a specialized service program known as Certified Service SM. Our fully staffed Customer Care Center (CCC) is available to meet all of your support needs including highly responsive technical support; one‐on‐one communication with account representatives and technical experts; electronic data interchange (EDI); a highly‐efficient logistics support chain, automated dispatch and communications system and a tightly integrated system that allows incident management; trouble‐shooting and reporting to be seamlessly provided to customers seamlessly, regardless of location.

 

BendPak Inc. serves more than half a million satisfied customers worldwide. Our award-winning Certified Service™ program is how we keep those customers smiling long after the initial purchase of their garage equipment product. When the unexpected happens, BendPak Certified Service™ is your first and final step towards making it right.

One phone call puts you in touch with our fully staffed Customer Care Center (CCC) to meet all your needs with highly responsive technical support, one-on-one communication with account representatives and technical experts, an Electronic Data Interchange (EDI); a highly-efficient logistics support chain, as well as automated communications and dispatch network. All of these support features are tightly integrated into a well-oiled system, so we can seamlessly provide the best incident management, trouble-shooting and reporting to all our customers right over the phone.

Whether you're in the United States or almost anywhere around the globe, an entire fleet of fully-equipped service vehicles is standing by to dispatch a mobile factory-trained technician or service provider unit to your location, if needed. Our on-site experts are trained and qualified to perform warranty services, equipment repairs, inspections, preventative maintenance and part replacement with unparalleled speed and efficiency, right there on your premises.

In the event that you need a replacement part, BendPak's "Spare in the Air" repair strategy provides overnight-or-sooner part replacement. Our comprehensive spares inventory and partnerships with industry-leading service providers ensure the quickest possible turnaround. What's more, BendPak's warehouses and shipping processes are state-of-the-art. A logistics support team verifies availability, inventory, shipping and delivery from start to finish. So when you buy BendPak, you're getting more than great automobile service equipment. You're getting peace of mind.

The BendPak / Ranger technical support staff is located in the same facilities as our engineers, manual writers and assemblers, giving you unprecedented access to the men and women who designed the very equipment you're calling about. Our tools, equipment and necessary technical resources are 100% available to you, so any complex technical issue is resolved without delay. You aren't going to find this kind of convenient, dedicated support anywhere else besides BendPak / Ranger.

Our reputation is one of not only legendary products, but legendary technical support. We're obsessed with making sure that you are a BendPak / Ranger fan for life, so we give you the very best after-sales support in the world. It's both our pleasure and our specialty. The moment you purchased a product from BendPak / Ranger, you became part of a family of folks who have a passion for automobiles and service equipment, just like you. We're just happy to take care of our own and committed to making it as easy as possible to solve your equipment issues. With BendPak's award-winning Certified Service™ program, it's step 1 and you're done!

Call Us Toll Free:
800-253-2363
 
 


Click picture for more information

 

Shipping Information

  • The cost of shipping is FREE! (contiguos 48 states only)
  • More information on delivery times and options can be found here
  • We only ship to the 48 contiguous states 
  • Unloading Truck-Shipped Merchandise: This item will ship via Standard Truck Freight (common carrier or flat-bed). For an additional fee (charged by the carrier, not MyToolGuy.com), trucks with lift-gates can be arranged to move your products from the bed of the truck to the ground, at that point it will be up to you to move the product. The shipping carrier will call and schedule delivery, at which time, you may request a lift-gate and arrange payment with the carrier for that service.
  • MyToolGuy.com does not ship eBay purchases to Alaska, Hawaii, US protectorates such as Puerto Rico or to international addresses (including Canada) at this time
  • MyToolGuy.com can not ship to PO boxes including APO/FPO boxes 
  • This item ships directly from the factory - Estimated Delivery Time: 11 - 16 Business Days.  Please note that we do not ship items on weekends or holidays.  Please make sure you are aware of the delivery time before you purchase this product  

Note:
Free shipping  to the Canada-USA border.

 

 

TWO POST LIFTSFOUR POST LIFTSPARKING STORAGE LIFTS
ALIGNMENT LIFTSSPECIALTY LIFTS LIFT ACCESSORIES
MOTORCYCLE LIFTSWHEEL BALANCERSTIRE REPAIR
WHEEL ALIGNERTIRE CHANGERSBRAKE LATHES
AIR COMPRESSORSTOOL STORAGEOIL DRAINS
WORK BENCHESCRUSHERSSPRAY WASH CABINETS
PIPE BENDERSSHOP PRESSESJACK STANDS
FLOOR JACKSTRANSMISSION JACKSSHOP EQUIPMENT

 

PL 14000 Images

 


 
                   
 
             
 

 

 
                   
 
             
 

 
More Lift Suggestions
HD-9
9,000 Lb Capacity
 Free Standing

 
HD-9-XW
9,000 Lb Capacity
 Free Standing
                   
 
HD-9-ST
9,000 Lb Capacity
Free Standing
             
 
HD-9-STX
9,000 Lb Capacity
 Free Standing

 
PL-6000
6,000 Lb Capacity
 Single Post Lift Deck

 
PL-6000X
6,000 Lb Capacity
 Single Post Lift Deck
Extended Rise
                   
 
PL-7000X
7,000 Lb Capacity
 Two Post Lift Deck
Extended Rise
             
 
PL 14000
14,000 Lb Capacity
 3-Stacker

 

 

 

Click financing-available-2.png for Finance/Lease Application


The Tool Connection Since 1984 203-813-0414
 
Satisfaction Guaranteed

 

 

 

 

 

   


THE TOOL CONNECTION
Automotive Lifts and Shop Equipment- Since 1984

931 Bantam Road - P.O. Box 453 - BANTAM - Conn. 06750-0453 

Copyright © 2000-2014 -
  Last modified: December 15, 2014   
Contact us:
sales@mytoolguy.com   Fax (206) 666-2149   
Call
Toll Free
877-572-8298 or 203-813-0414